EN 10346 HX260YD + ZF Galvannealed IF steel coil

-

EN 10346 HX260YD + ZF Galvannealed IF steel sheets and coils

Grade: HX260YD
Number: 1.0926
Classification: Alloy quality steel, steel with high proof strength for cold forming
Standard: EN 10346: 2009 Continuously hot-dip coated steel flat products. Technical delivery conditions

HX260YD steel technical data
Chemical composition % of steel HX260YD (1.0926): EN 10346-2009


C

Si

Mn

P

S

Nb

Ti

Al

max 0.01

max 0.25

max 1.3

max 0.1

max 0.025

max 0.09

max 0.12

max 0.10

Mechanical properties of HX260YD (1.0926)


Steel Type

Galvannealed IF

Minimum Tensile Strength

260 MPa

Minimum Yield Strength

Call for Details

Coatings Available

ZF100, ZF120, ZF140

Type

sheet, coil

Comments

Post a Comment

Popular posts from this blog

EN 10149-2 S550MC high yield strength steel

-
Image
EN 10149-2 Grade S550MC steel is fine-grain steel with good cold formability, S550MC Specification for hot-rolled flat products made of high yield strength steels for cold forming. It is ideal for applications requiring low weight, high strength and good formability. Typical applications include telescopic booms, earthmoving equipment, agricultural machinery, truck and trailer  frames. EN 10149-2 Classification The steel grades S315MC, S355MC, S420MC, S460MC, S500MC and S550MC of this European Standard are alloy quality steels and the steel grades S600MC, S650MC, S700MC, S900MC and S960MC of this European Standard are alloy special steels according to EN 10020. EN 10149-2 S550MC Chemical composition C max. Mn max. Si max. P max. S max. Al min. Nb max. V max. Ti max. 0.12 1.80 0.50 0.025 0.015 0.015 0.09 0.20 0.15  Mechanical properties for S550MC thermomechanically rolled steel Grade Yield Strength MPa min. Tensile Strength MPa Elongation % < 3mm ≥ 3mm S550MC 550 600 - 760 12 14 H
Read more

EN 10216-2 10CrMo9-10 boiler tubes

-
Image
Standard: EN 10216-2 Grade:10CrMo9-10, 1.7380 Category: special alloy steel, seamless tubes, boiler tubes Technical delivery conditions: non-alloy steel tubes with specified elevated temperature properties Chemical composition of 10CrMo9-10  boiler tubes C% Si% max Mn% P% max S% max Cr% Mo% Ni% max Alt% min Cu% max 0.10- 0.17 0.35 0.40- 0.70 0.025 0.020 0.70- 1,15 0.40- 0.60 0.30 ≥ 0.020 0.30 Mechanical properties of 10CrMo9-10 tubes Steel grades Mechanical properties during tensile testing in room temperature Resilience Upper yield limit or yield strength Re or R0.2 for wall thickness of t min Tensile strength Rm Elongation A min% Minimum energy average absorbed KVJ at the temperature of
Read more